Command Line Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping
Enable DHCP Snooping globally.
Z9500
Syntax
[no] ip dhcp snooping
Defaults Disabled.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
When enabled, no learning takes place until you enable snooping on a VLAN. After
disabling DHCP Snooping, the binding table is deleted and Option 82, IP Source
Guard, and Dynamic ARP Inspection are disabled.
Related
Commands
ip dhcp snooping vlan — enables DHCP Snooping on one or more VLANs.
1522
Security