Command Line Reference Guide

ip ssh rsa-authentication (Config)
Enable RSA authentication for the SSHv2 server.
Z9500
Syntax
ip ssh rsa-authentication enable
To disable RSA authentication, use the no ip ssh rsa-authentication
enable command.
Parameters
enable Enter the keyword enable to enable RSA authentication for
the SSHv2 server.
Defaults Disabled.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
Enabling RSA authentication allows the user to log in without being prompted for a
password. In addition, the OpenSSH compatible SSHv2 RSA public key must be
added to the list of authorized keys (ip ssh rsa-authentication my-
authorized-keys device://filename command).
Related
Commands
ip ssh rsa-authentication (EXEC) — adds keys for RSA authentication.
1508
Security