Command Line Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
Important Points:
• Use show processes ipc commands only when you are working directly
with Dell Technical Support to troubleshoot a problem.
Example: show
processes ipc
send-stats
Dell#show processes ipc send-stats rp
IPC Send Statistics on RP
Memory Used by Send DB on this processor: 1451880 bytes
SeqNo - Last sent guaranteed IPC pkt sequence no from this
source to destination
Success - No of successfull guaranteed IPC packets sent from
source to destination
1st-R - No of first retry attempts
2nd-R - No of second retry attempts
Fails - No of guaranteed IPC pkts that could not be
transmitted
RTT(ms) - Avg. Round Trip time for guaranteed IPC packets in
millisecs
NonG-S - No of non-guaranteed IPC pkts succesfully sent. This
does not include those sent by SWP
NonG-F - No of non-guaranteed IPC pkt transmission failures
SWP-S - No of non-guaranteed SWP IPC pkts succesfully sent
SWP-F - No of non-guaranteed SWP IPC pkt transmission failures
Source-> Destination SeqNo Success 1st-R
2nd-R Fails RTT(ms) NonG-S NonG-F SWP-S
SWP-FIPC: 1 -> TME: 1 1561 3
0 0 0 2 0 0
0 0
IPC: 1 -> IPC: 0 37025 0
0 0 0 0 1107 0
0 0
EVENTLOGAGENT: 1 -> TME: 1 18888 0
0 0 0 0 1 0
0 0
EVENTLOGAGENT: 1 -> TME: 1 18888 0
0 0 0 0 1 0
0 0
EVENTLOGAGENT: 1 -> TME: 1 18888 0
0 0 0 0 1 0
0 0
EVENTLOGAGENT: 1 -> TME: 1 18888 0
0 0 0 0 1 0
0 0
SYSADMTSK: 1 -> TME: 1 26574 1
0 0 0 0 0 0
0 0
146
Control and Monitoring