Command Line Reference Guide

198 0 0 0 0.00% 0.00% 0.00% 0 inetd
---------- More ----------
Example: show
processes cpu
summary
Dell#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
---------------------------------------
CP 43% 42% 40%
RP 0% 0% 0%
show processes ipc
Display the IPC messaging used internally between Dell Networking OS processes.
Z9500
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp |
linecard {slot-id | all}]
Parameters
recv-stats Enter the keyword recv-stats to display information on
IPC receiver-side messages.
send-stats Enter the keyword send-stats to display information on
IPC sender-side messages.
cp Enter the keyword cp to view IPC message statistics on the
Control Processor CPU.
rp Enter the keyword rp to view IPC message statistics on the
Route Processor CPU.
linecard slot-id Enter the slot ID of the line card for which you want to view
IPC message statistics. The range of Z9500 slot IDs is from 0
to 2. Enter linecard all to view IPC statistics for all line
cards.
Defaults Display IPC message statistics on all Z9500 CPUs: Control Processor, Route
Processor, and line cards.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring
145