Command Line Reference Guide

Defaults 1
Command
Modes
ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage
Information
This command ensures that route information being redistributed is converted to
the same metric value.
Related
Commands
redistribute — allows you to redistribute routes learned by other methods.
description
Enter a description of the RIP routing protocol.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the RIP protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER RIP
Routing Information Protocol (RIP)
1385