Command Line Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
WRED1 2000 7000
test cam-usage
Verify CAM usage for an input policy-map configuration.
Z9500
Syntax
test cam-usage service-policy input policy-map linecard {slot-
id port-set port-pipe| all}
Parameters
policy-map Enter the policy map name.
linecard slot-id
port-set port-
pipe
(OPTIONAL) Enter the slot number of a line card and a port-
pipe number to verify CAM usage on a specified set of ports.
Valid Z9500 slot IDs are 0 to 2. The range of valid port-pipe
numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and
2.
linecard all (OPTIONAL) Enter the keywords linecard all to verify
CAM usage on all line cards.
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
1368
Quality of Service (QoS)