Command Line Reference Guide

Parameters
wred-profile
interface
Enter the keywords wred-profile and optionally one of
the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40–Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
interface Enter one of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40–Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.1 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
Example
Dell#show qos statistics te 0/1
Queue# Queued Queued Matched Matched Dropped
Bytes Pkts Pkts Bytes Pkts
(Cumulative) (Cumulative)
0 0 0 1883725 1883725000 0
1 0 0 1883725 1883725000 0
2 0 0 1883725 1883725000 0
3 0 0 1883725 1883725000 0
4 0 0 1883725 1883725000 0
1366
Quality of Service (QoS)