Command Line Reference Guide

Version Description

9.5(0.0) Added support for the ipv6 and ip-any options on the

Z9000, S6000, S4820T, S4810, MXL.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added the keyword multicast. Added support for the

DSCP marking option for the S-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

7.5.1.0 Added support for the DSCP Marking option.

6.1.1.1 Introduced on the E-Series.

Usage

Information

To access this command, enter the class-map command. After the class map is

identified, you can configure the match criteria.

The match ip precedence command and the match ip dscp command are

mutually exclusive.

Up to eight precedence values can be matched in one match statement. For

example, to indicate the IP precedence values 0 1 2 3, enter either the match ip

precedence 0-3 or match ip precedence 0,1,2,3 command.

NOTE: Only one of the IP precedence values must be a successful match

criterion, not all of the specified IP precedence values must match.

Commands

class-map — identifies the class map.

match ip vlan

Uses a VLAN as the match criterion for an L3 class map.

Z9500

Syntax

match ip vlan vlan-id

To remove VLAN as the match criterion, use the no match ip vlan vlan-id

command.

1344

Quality of Service (QoS)