Command Line Reference Guide

Example
Dell(conf-wred)#wred thresh-1
Dell(conf-wred)#threshold min 100 max 200 max-drop-rate 40
Dell(conf-wred)#wred thresh-2
Dell(conf-wred)#threshold min 300 max 400 max-drop-rate 80
Dell(conf)#service-pool wred green pool0 thresh-1 pool1
thresh-2
Dell(conf)#service-pool wred yellow pool0 thresh-3 pool1
thresh-4
Dell(conf #service-pool wred weight pool0 11 pool1 4
show qos dot1p-queue-mapping
Displays the dot1p priority to queue mapping on the switch.
Z9500
Syntax
show qos dot1p-queue-mapping
Defaults
• dot1p Priority: 0 1 2 3 4 5 6 7
• Queue: 0 0 0 1 2 3 3 3
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Related
Commands
service-class dot1p-mapping — Identifies the class map.
Per-Port QoS Commands
Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
Quality of Service (QoS)
1331