Command Line Reference Guide

max-age
seconds
Enter the keywords max-age then the time interval, in
seconds, that the system waits before refreshing
configuration information. The range is from 6 to 40
seconds. The default is 20 seconds.
Defaults 20 seconds
Command
Modes
CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced.
Related
Commands
vlan bridge-priority — sets the bridge-priority value.
vlan forward-delay — changes the time interval before the system transitions to the
forwarding state.
vlan hello-time — changes the time interval between BPDUs.
show spanning-tree pvst — displays the PVST+ configuration.
1322
Per-VLAN Spanning Tree Plus (PVST+)