Command Line Reference Guide

Field Description
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface
resides.
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
Example (All)
Dell# show interfaces private-vlan
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Fo 1/52 30 Isolated Host Up
Fo 2/12 20 Community Host Up
Po 10 10 Primary Trunk Up
Example
(Specific)
Dell# show interfaces private-vlan te 2/2
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Te 2/2 100 Isolated Host Up
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated,
or primary.
show vlan private-vlan – displays the PVLANs and/or interfaces that are part of a
PVLAN.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan
Display PVLAN configurations, including member interfaces, type, and status.
Z9500
Syntax
show vlan private-vlan [vlan-id | community vlan-id | interface
interface | isolated vlan-id | mapping vlan-id | primary vlan-
id]
Parameters
vlan-id (OPTIONAL) Enter a VLAN ID number to display the PVLAN
configuration.
community
vlan-id
(OPTIONAL) Enter the keyword community and a PVLAN ID
number to display the configuration for a community PVLAN.
interface
interface
(OPTIONAL) Enter the keyword interface followed by the
interface type and slot/port numbers or port-channel
number to display the PVLAN configuration for a member
1302
Private VLAN (PVLAN)