Command Line Reference Guide

Version Description
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
7.4.1.0 Introduced.
Usage
Information
The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr linecard 0 port-set 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp
Next-hop Egress
Index Flag Port Port MAC Port
---------------------------------------------------------------
--------------
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:00:ab:9c:ed Vl 1001(0/2)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:24 Vl 1002(0/2)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:25 Vl 1003(0/2)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:26 Vl 1004(0/2)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:00:78:58:11 Vl 1005(0/3)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:27 Vl 1006(0/3)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:28 Vl 1007(0/3)
00000 1 100 IP 0x0 0 0 0.0.0.0/0
0.0.0.0/0 00:00:04:b7:14:29 Vl 1008(0/3)
Dell#
Related
Commands
• ip redirect-group – applies a redirect group to an interface.
• show ip redirect-list – displays the redirect-list configuration.
show ip redirect-list
View the redirect list configuration and the interfaces it is applied to.
Z9500
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-
name
Enter the name of a configured Redirect list.
1286
Policy-based Routing (PBR)