Command Line Reference Guide

PIM-Source Specific Mode (PIM-SSM)

The protocol-independent multicast source-specific mode (PIM-SSM) commands in this section are

supported in the Dell Networking operating system.

IPv4 PIM Commands

The following commands apply to IPv4 PIM-SM, IPv4 PIM-SSM, and PIM-DM.

• clear ip pim tib

• debug ip pim

• ip pim dr-priority

• ip pim neighbor-filter

• ip pim query-interval

• show ip pim interface

• show ip pim neighbor

• show ip pim tib

IPv4 PIM-Source Specific Mode Commands

The following IPv4 PIM-source specific mode (PIM-SSM) commands are supported:

• ip pim ssm-range

• show ip pim ssm-range

ip pim ssm-range

Specify the SSM group range using an access list.

Z9500

Syntax

ip pim ssm-range {access_list_name}

Parameters

access_list_na

Enter the name of the access list.

1272

PIM-Source Specific Mode (PIM-SSM)