Command Line Reference Guide

clear ipv6 pim tib
Clear the IPv6 PIM multicast-routing database (tree information base-TIB).
Z9500
Syntax
clear ipv6 pim tib [group-address]
Parameters
group-address (OPTIONAL) Enter the multicast group address in the
x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version Description
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0(1.3) Introduced on the S5000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
show ipv6 pim tib – displays the IPv6 PIM tree information base (TIB)
ipv6 pim bsr-border
Invoke IPv6 PIM debugging.
Z9500
Syntax
debug ipv6 pim [bsr | events | group group | packet | register
[group] | state | | timer [assert | hello | joinprune |
register]]
To disable IPv6 PIM debugging, use the no debug ipv6 pim command.
Parameters
bsr (OPTIONAL) Enter the keyword bsr to invoke debugging of
IPv6 PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword events to invoke debugging
of IPv6 PIM events.
PIM-Sparse Mode (PIM-SM)
1257