Command Line Reference Guide

inbound/outbound ah
Authentication policy applied to inbound or
outbound traffic.
inbound/outbound esp
Encryption policy applied to inbound or outbound
traffic.
spi
Security policy index number used to identify the
policy.
transform
Security algorithm that is used to provide
authentication, integrity, and confidentiality.
in use settings
Transform that the SA uses (only transport mode is
supported).
replay detection support Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS
ACTIVE: The authentication or encryption policy is
enabled on the interface.
show ipv6 ospf interface
View OSPFv3 interface information.
Z9500
Syntax
show ipv6 ospf [interface]
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel and a number. The range is from 1 to 128.
• For a Tunnel interface, enter the keywords tunnel and a
number. The range is from 1 to 16383.
• For a VLAN, enter the keyword vlan and a number from
1 to 4094.
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3)
1219