Command Line Reference Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Related
Commands
default-information originate — generates a default route into the OSPF routing
domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
Z9500
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1
to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-
value number. The range is from 0 to16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults none
Command
Modes
ROUTER OSPF
Open Shortest Path First (OSPFv2 and OSPFv3)
1149