Command Line Reference Guide

redistribute
Redistribute information from another routing protocol throughout the OSPF process.
Z9500
Syntax
redistribute {connected | rip | static} [metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis |
rip | static} command.
Parameters
connected Enter the keyword connected to specify that information
from active routes on interfaces is redistributed.
rip Enter the keyword rip to specify that RIP routing
information is redistributed.
static Enter the keyword static to specify that information from
static routes is redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The
range is from 0 to 4294967295.
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1148
Open Shortest Path First (OSPFv2 and OSPFv3)