Command Line Reference Guide

Version Description
6.1.1.1 Introduced on the E-Series.
mib-binding
Enable this OSPF process ID to manage the SNMP traps and process SNMP queries.
Z9500
Syntax
mib-binding
To mib-binding on this OSPF process, use the no mib-binding command.
Defaults none.
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced to all platforms.
Usage
Information
This command is either enabled or disabled. If no OSPF process is identified as the
MIB manager, the first OSPF process is used.
If an OSPF process has been selected, it must be disabled prior to assigning new
process ID the MIB responsibility.
network area
Define which interfaces run OSPF and the OSPF area for those interfaces.
Z9500
Syntax
network ip-address mask area area-id
To disable an OSPF area, use the no network ip-address mask area area-
id command.
1144
Open Shortest Path First (OSPFv2 and OSPFv3)