Command Line Reference Guide

metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to
configure a metric value for the route. The range is from 1 to
16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then an
OSPF link state type of 1 or 2 for default routes. The values
are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of an established route map.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Related
Commands
redistribute — redistributes routes from other routing protocols into OSPF.
default-metric
Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the
redistribute command.
Z9500
Syntax
default-metric number
To return to the default values, use the no default-metric [number]
command.
Open Shortest Path First (OSPFv2 and OSPFv3)
1121