Command Line Reference Guide

Usage
Information
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit reset
Reset the MAC address learning-limit error-disabled state.
Z9500
Syntax
mac learning-limit reset
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
show cam mac linecard (dynamic or static)
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Z9500
Syntax
show cam mac linecard slot-id port-set port-pipe [address
mac_addr | dynamic | interface interface | static | vlan vlan-
id]
Parameters
linecard slot-id (REQUIRED) Enter the keyword linecard then a slot
number to select the linecard for which to gather
information. The range of Z9500 slot IDs are from 0 to 2.
Layer 2
1009