Reference Guide

Related
Commands
show mac-address-table — displays the current MAC address configuration.
show mac learning-limit
Display MAC address learning limits set for various interfaces.
Z9500
Syntax
show mac learning-limit [violate-action] [detail] [interface
interface]
Parameters
violate-action (OPTIONALY) Enter the keywords violate-action to
display the MAC learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC
learning limit in detail.
interface
interface
(OPTIONAL) Enter the keyword interface with the
following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Added the vlan option on the E-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Added support for the violate-action and detail
options.
866
Layer 2