Reference Guide

Rcvd: 0 format errors, 0 checksum errors, 0 redirects, 0
unreachable
0 echo, 0 echo reply, 0 mask requests, 0 mask replies, 0
quench
0 parameter, 0 timestamp, 0 info request, 0 other
Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply
0 mask requests, 0 mask replies, 0 quench, 0 timestamp
0 info reply, 0 time exceeded, 0 parameter problem
UDP statistics:
Rcvd: 0 total, 0 checksum errors, 0 no port
0 short packets, 0 bad length, 0 no port broadcasts, 0
socket full
Sent: 0 total, 0 forwarded broadcasts
TCP statistics:
Rcvd: 23829 total, 0 checksum errors, 0 no port
Sent: 16048 total
ARP statistics:
Rcvd: 156 requests, 11 replies
Sent: 21 requests, 10 replies (0 proxy)
Related
Commands
clear ip traffic — clears IP traffic statistics.
show tcp statistics
Display statistical information about TCP traffic transmitted on Z9500 CPUs.
Z9500
Syntax
show tcp statistics {all | cp | rp}
Parameters
all Enter the keyword all to view all TCP statistics on Z9500
CPUs.
cp Enter the keyword cp to view TCP statistics only from the
Control Processor.
rp Enter the keyword rp1 to view TCP statistics only from the
Route Processor.
Command
Modes
EXEC Privilege
Default Display TCP information from all processors.
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
IPv4 Routing
801