Reference Guide

Usage
Information
The following table illustrates the fields displayed in the output of this command:
Field Description
Link-bundle trigger threshold Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot Slot number of a Z9500 line card.
npuUnit Network processing unit (NPU) ID
number of a high-Gigabit link bundle/
port-channel.
hg-port-channel Port-channel number of a high-Gigabit
link bundle.
Utilization (In Percent) Percentage of total bandwidth usage
by the traffic transmitted on the high-
Gigabit link bundle.
Alarm State Indicates whether an alarm has been
generated if uneven traffic distribution
occurs in a high-Gigabit link bundle.
Possible values are Active and Inactive.
Interface Member interface of the specified
high-Gigabit link bundle/port channel
in the format:
slot-id/npu-id:hghigig-port-number
Utilization (In Percent) Percentage of total link-bundle
bandwidth used on each member link.
Example
Dell# show hg-link-bundle-distribution slot 0 npuUnit 2 hg-
port-channel 0
hg-link-bundle trigger threshold - 60
Slot 0 npuUnit 2 hg-port-channel-0 Utilization [In Percent] -
0 Alarm State - Inactive
Interface Utilization [In Percent]
0/2:hg0 10
0/2:hg1 10
0/2:hg2 10
0/2:hg3 10
Interfaces
721