Reference Guide

Card FPGA Name Current Version New Version

----------------------------------------------

CP SYSTEM CPLD 0x07 0x08

************************************************************

* Warning - Upgrading FPGA is inherently risky and should *

* only be attempted when necessary. A failure at this upgrade

may *

* cause a board RMA. Proceed with caution ! *

************************************************************

***********************************************************

* When the upgrade has successfully completed, the system will

be *

* automatically rebooted to reload the upgraded

components. *

************************************************************

Upgrade CPLD image for system [yes/no]: yes

FPGA upgrade in progress!!! Please do NOT power off the unit

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Usage

Information

Do not restart the switch while an upgrade is progressing. Restarting the chassis

during an upgrade may corrupt critical boot components.

When an upgrade of CPLD devices successfully completes, the switch reloads

automatically.

Commands

• upgrade fpga-image system fpga — upgrades the CPLD devices in all Z9500

CPUs.

upgrade fpga-image system fpga booted

Use this command to upgrade the FPGA devices in the Z9500 Route Processor and Control Processor

CPUs using the currently running Dell Networking operating-system image (and only when required by

the upgrade procedure in the Z9500 release notes).

Z9500

Syntax

upgrade fpga-image system fpga booted

Defaults none

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

File Management