Reference Guide

********
Dell#
upgrade fpga-image linecard booted
Use this command to upgrade the FPGA and CPLD devices in Z9500 line-card CPUs using the currently
running Dell Networking operating-system image (and only when required by the upgrade procedure in
the Z9500 release notes).
Z9500
Syntax
upgrade fpga-image linecard {slot-id | all} booted
Parameters
linecard slot-id Enter the slot ID number to specify the line-card CPU to
upgrade. The range of Z9500 slot IDs is 0 to 2. Enter
linecard all to upgrade all Z9500 line cards.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version 9.0.0.0 Introduced on the Z-Series.
Example
Dell# upgrade fpga-image linecard all booted
Current FPGA information in the system:
=======================================
Card FPGA Name Current Version New Version
---------------------------------------------------------------
---------
Linecard0 PORTCARD CPLD 0xac 0xb2
Linecard1 PORTCARD CPLD 0xab 0xb2
***************************************************************
********
* Warning - Upgrading FPGA is inherently risky and should *
* only be attempted when necessary. A failure at this upgrade
may *
* cause a board RMA. Proceed with caution ! *
***************************************************************
********
***************************************************************
********
* When the upgrade has successfully completed, the system will
File Management
69