Reference Guide

spanning-
tree
for the current spanning tree
configuration
static
for the current static route
configuration
status
for the file status information
tacacs+
for the current TACACS+
configuration
tftp
for the current TFTP configuration
trace-group
for the current trace-group
configuration
trace-list
for the current trace-list configuration
uplink-
state-group
for the uplink state group
configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile
configuration
configured (OPTIONAL) Enter the keyword configuration to display
line card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Example
Dell#show running-config
Current Configuration ...
! Version 9.2(1.0B2)
File Management
63