Reference Guide

Type Version Target checksum
runtime 9.2(1.0B5) CP passed
runtime 9.2(1.0B5) LP passed
runtime 9.2(1.0B5) RP passed
BOOT IMAGE INFORMATION :
-----------------------------------------------------
Type Version Target checksum
boot flash 3.2.1.0 cp passed
BOOTSEL IMAGE INFORMATION :
-----------------------------------------------------
Type Version Target checksum
boot selector 3.2.0.0 cp passed
DEVICE IMAGE INFORMATION :
-----------------------------------------
Type Version Target
Portcard CPLD (0) 0xb5 LP (0)
Portcard CPLD (1) 0xb5 LP (0)
Portcard CPLD (2) 0xb5 LP (0)
Portcard CPLD (0) 0xb5 LP (1)
Portcard CPLD (1) 0xb5 LP (1)
Portcard CPLD (2) 0xb5 LP (1)
Portcard CPLD (3) 0xb5 LP (1)
Portcard CPLD (0) 0xb5 LP (2)
Portcard CPLD (1) 0xb5 LP (2)
Portcard CPLD (2) 0xb5 LP (2)
Portcard CPLD (3) 0xb5 LP (2)
System CPLD 0x0b CP
FPGA 0x1c CP
Backup FPGA 0x19 CP
Usage
Information
NOTE: A filepath that contains a dot ( . ) is not supported.
show running-config
Display the current configuration and display changes from the default values.
Z9500
Syntax
show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default)
configuration, enter one of the following keywords:
NOTE: If you did not configure anything that entity,
nothing displays and the prompt returns.
aaa
for the current AAA configuration
acl
for the current ACL configuration
arp
for the current static ARP
configuration
60
File Management