Reference Guide

server statistics Enter the keywords server statistics to clear all
counter information on the DHCP server.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820t.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
Usage
Information
Entering <CR> after the clear ip dhcp binding command clears all the IPs
from the binding table.
debug ip dhcp client events
Activate the debugging and display of log messages on DHCP client interfaces for IP address acquisition,
IP address release, and IP address and lease time renewal.
Z9500
Syntax
debug ip dhcp client events [interface type slot/port]
Parameters
interface
typeslot/port
Enter the keyword interface with the interface type and
slot/port information to display DHCP event messages for a
specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.2(1.0) Introduced on the Z9500.
574
Dynamic Host Configuration Protocol (DHCP)