Reference Guide

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.4 Output expanded to display current reload mode (normal or
Jumpstart).
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Dell#show bootvar
PRIMARY IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ZC-9.2.1.0.bin
SECONDARY IMAGE FILE = variable does not exist
DEFAULT IMAGE FILE = flash://FTOS-ZC-9.2.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = ftp://box:password@10.31.1.205//home/
5.3.1/5.3.1.0/FTOS-ZC-9.2.1.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
Dell#
Related
Commands
boot system — sets the location of Dell Networking OS image files.
show file
Display contents of a text file in the local filesystem.
Z9500
Syntax
show file filesystem
Parameters
filesystem Enter one of the following:
• For internal flash, enter flash:
File Management
57