Reference Guide

Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Usage
Information
The port-set values are internal port numbers. For a cross reference of the internal
and port numbers, refer to the Debugging and Diagnostics chapter in the Dell
Networking OS Configuration Guide for the Z9500 System.
Example
Dell#show hardware layer2 acl eg-acl linecard 2 port-set 0
EID 0x000010ce: gid=0x10,
slice=3, slice_idx=0, part =0 prio=0x10ce,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
StageEgress
Color
Offset: 22 Width: 2
DATA=0x00000001
MASK=0x00000003
action={act=RpDrop, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 62 slice = 3 idx=0 entries=1}
{Packets}
EID 0x000010cd: gid=0x10,
slice=3, slice_idx=0x1, part =0 prio=0x10cd,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
StageEgress
OutPort
Offset: 193 Width: 7
DATA=0x00000000
MASK=0x0000007f
action={act=RpDrop, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 63 slice = 3 idx=0 entries=1}
{Packets}
EID 0x000010cc: gid=0x10,
slice=3, slice_idx=0x2, part =0 prio=0x10cc,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
DstMac
Offset: 90 Width: 48
DATA=0x00000180 c2000000
MASK=0x0000ffff ff000000
StageEgress
action={act=DropCancel, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 65 slice = 3 idx=1 entries=1}
{Packets}
--More--
Debugging and Diagnostics
565