Reference Guide

Example
(Linecard:
Backplane-link
Status)
Dell#show hardware linecard 0 bp-link-state
Total valid Links - 39
Valid Link bmp -
0xfc0003f0-000fc000-3f0000fc-0003f000-00380000
Valid Link bmp State -
0xf40003f0-000fc000-3d0000fc-0003f000-00380000
Example
(Linecard Unit
Port: High-
Gigabit Port
Statistics)
Dell#show hardware linecard 0 hg-stats unit 1 port 50
Higig Port Statistics:
HiGigabitEthernet 0/1/50,
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
0 packets, 0 bytes 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
0 Multicasts, 0 Broadcasts 0 Unicasts
0 throttles, 0 discarded, 5208131494077267968 collisions
19141612676317184 wredDrops
Rate info (interval 15 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of
line-rate
Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of
line-rate
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show system (S-Series and Z-Series) — displays the current status of all the stack
members or a specific member.
show hardware ipv6
Display information about IPv6 ACLs used on a Z9500 line card and port pipe.
Z9500
Syntax
show hardware ipv6 {eg-acl | in-acl} linecard slot-id port-set
port-pipe
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to
display ingress or egress ACL data.
linecardslot-id Enter the linecard slot-id parameters to specify a
Z9500 line card. The range of slot IDs is from 0 to 2.
562
Debugging and Diagnostics