Reference Guide

show boot system
Displays information about boot images currently stored on the system.
Z9500
Syntax
show boot system all
Parameters
all Display the boot images stored on the system for the
Control Processor, Route Processor, and line card CPUs.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Example
Dell#show boot system all
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------------------------
-
CP DOWNLOAD BOOT 9-3(0-312) 9-3(0-430)
RP DOWNLOAD BOOT 9-3(0-383) 9-3(0-100)
linecard 0 is not present.
linecard 1 is not present.
linecard 2 DOWNLOAD BOOT 9-3(0-312) 9-3(0-100)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
show bootvar
Display the variable settings for the boot parameters.
Z9500
Syntax
show bootvar
Command
Modes
EXEC Privilege
56
File Management