Reference Guide

• ^ (caret) matches the beginning of the input string. If you
use the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
• $ (dollar sign) matches the end of the output string.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(1.0) Introduced on the Z9500.
Version 7.4.1.0 Introduced
debug ip bgp keepalives
Allows you to view information about BGP keepalive messages.
Z9500
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only information
on inbound keepalive routes.
out (OPTIONAL) Enter the keyword out to view only information
on outbound keepalive routes.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(1.0) Introduced on the Z9500.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Border Gateway Protocol
457