Reference Guide

show ip bgp paths community
View all unique COMMUNITY numbers in the BGP database.
Z9500
Syntax
show ip bgp paths community
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp paths community command shown
in the following example.
Field Description
Address Displays the internal address where the path attribute is
stored.
Hash Displays the hash bucket where the path attribute is stored.
Refcount Displays the number of BGP routes using these
communities.
Community Displays the community attributes in this BGP path.
Example
E1200-BGP>show ip bgp paths community
Total 293 Communities
Address Hash Refcount Community
0x1ec88a5c 3 4 209:209 209:6059 209:31272
3908:900 19092:300
0x1e0f10ec 15 4 209:209 209:3039 209:31272
3908:900 19092:300
0x1c902234 37 2 209:209 209:7193 209:21362
3908:900 19092:300
0x1f588cd4 41 24 209:209 209:6253 209:21362
3908:900 19092:300
0x1e805884 46 2 209:209 209:21226 286:777
410
Border Gateway Protocol