Reference Guide

Related
Commands
capture bgp-pdu max-buffer-size — specifies a size for the capture buffer.
show config
View the current ROUTER BGP configuration.
Z9500
Syntax
show config
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Example
Dell(conf-router_bgp)#show config
!
router bgp 45
neighbor suzanne peer-group
neighbor suzanne no shutdown
neighbor sara peer-group
neighbor sara shutdown
neighbor 13.14.15.20 peer-group suzanne
neighbor 13.14.15.20 shutdown
neighbor 123.34.55.123 peer-group suzanne
neighbor 123.34.55.123 shutdown
Dell(conf-router_bgp)#
Related
Commands
capture bgp-pdu max-buffer-size — specifies a size for the capture buffer.
show ip bgp
View the current BGP IPv4 routing table for the system.
Z9500
Syntax
show ip bgp [ipv4 unicast] [network [network-mask] [longer-
prefixes]]
384
Border Gateway Protocol