Reference Guide

dot1x reauthentication
Enable periodic reauthentication of the client.
Z9500
Syntax
dot1x reauthentication [interval seconds]
To disable periodic reauthentication, use the no dot1x reauthentication
command.
Parameters
interval
seconds
(Optional) Enter the keyword interval then the interval
time, in seconds, after which reauthentication is initiated.
The range is from 1 to 31536000 (one year). The default is
3600 (1 hour).
Defaults 3600 seconds (1 hour)
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series.
dot1x reauth-max
Configure the maximum number of times a port can reauthenticate before the port becomes
unauthorized.
Z9500
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
802.1X
181