Reference Guide

Lines Beginning
With or Including
Description
Length: Displays the packet length.
Router ID: Displays the OSPF3 router ID.
Area ID: Displays the Area ID.
Chksum: Displays the OSPF3 checksum.
default-information originate
Configure the system to generate a default external route into an OSPFv3 routing domain.
Z9500
Syntax
default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that
default route information must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to
configure a metric value for the route. The range is from 1 to
16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then an
OSPFv3 link state type of 1 or 2 for default routes. The values
are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of an established route map.
Defaults Disabled.
Command
Modes
ROUTER OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
1018
Open Shortest Path First (OSPFv2 and OSPFv3)