Users Guide

L2PT 0 0 0
v6 BGP 0 0 0
v6 OSPF 0 0 0
v6 VRRP 0 0 0
MLD 0 0 0
v6 ICMP NA 0 0 0
v6 ICMP RA 0 0 0
v6 ICMP NS 0 0 0
v6 ICMP RS 0 0 0
v6 ICMP 0 0 0
BGP 0 0 0
OSPF 0 0 0
RIP 0 0 0
VRRP 0 0 0
ICMP 0 0 0
IGMP 0 0 0
PIM 0 0 0
MSDP 0 0 0
BFD ON PHYSICAL PORTS 0 0 0
BFD ON LOGICAL PORTS 0 0 0
802.1x 0 0 0
iSCSI 0 0 0
DHCP RELAY 0 0 0
DHCP 0 0 0
NTP 0 0 0
FTP 0 0 0
TELNET 0 0 0
SSH 0 0 0
VLT CTRL 0 0 0
VLT IPM PDU 0 0 0
VLT TTL1 0 0 0
HYPERPULL 0 0 0
OPENFLOW 0 0 0
FEFD 0 0 0
TRACEFLOW 0 0 0
FCoE 0 0 0
SFLOW 0 0 0
L3 LOCAL TERMINATED 0 0 0
L3 UNKNOWN/UNRESOLVED ARP 0 0 0
L2 DST HIT/BROADCAST 0 0 0
MULTICAST CATCH ALL 0 0 0
v6 MULTICAST CATCH ALL 12600 12600 0
L3 HEADER ERROR/TTL0 0 0 0
IP OPTION/TTL1 0 0 0
L3 MTU FAIL 0 0 0
SOURCE MISS 0 0 0
STATION MOVE 0 0 0
TX ENTRY 887040 887040 0
DROP ENTRY 0 0 0
To clear the per-protocol counters of rate-limited control-plane traffic at the aggregated (switch) or line
card and port set level, use the clear control-traffic protocol [cp—switch | linecard {0–
2} portset {0–3}] counters
command; for example:
Dell#clear control-traffic protocol linecard 1 portset 2 counters
Dell#
Dell#clear control-traffic protocol cp-switch counters
Dell#
252
Control Plane Policing (CoPP)