Users Guide

306 Network Administration: DHCP Snooping and DHCP Relay
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_DHCP_Snooping&Relay.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
To query and add IP addresses to the Binding database:
1
Click Network Administration > DHCP Snooping > Binding Database .
A list of the database entries is displayed.
2 To query the database, enter query criteria and click Query . Database
entries matching the query are displayed.
3 To add an entry, click Edit, Add , and enter the fields:
–
Type — Select the entry type. The possible options are:
•
Dynamic —IP address was dynamically configured.
•
Static —IP address was statically configured.
–
MAC Address — Enter the MAC address to be recorded in the entry.
–
VLAN ID — Select the VLAN ID to which the IP address is
associated in the entry.
–
IP Address — Enter the IP address to be recorded in the entry.
–
Interface Type — Select the type and port or LAG to be recorded in
the entry.
–
Interface — Select the interface.
–
Lease Time — If the entry is dynamic, enter the amount of time that
the entry will be active in the DHCP Database. If there is no Lease
Time, check
Infinite .
DHCP Relay
This section describes DHCP relay.
It contains the following sections:
•Overview
• Global Settings
•Option 82
• Interface Settings