Users Guide

Network Administration: Quality of Service 243
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
To view policer statistics:
1
Click Network Administration > Quality of Service  QoS Statistics 
Policer Statistics .
The following statistics for the previously-defined counters are displayed:
–
Interface — Statistics are displayed for this interface.
–
Policy — Statistics are displayed for this policy.
–
Class Map — Statistics are displayed for this class map.
–
In-Profile Bytes — Number of in-profile bytes received.
–
Out-of-Profile Bytes — Number of out-of-profile bytes received.
2 Click Edit, Add to add a new counter that applies to another policy-class
map.
3 Enter the fields:
– Interface Type — Select either the port or LAG interface type.
– Interface — Select the interface for which the counter is defined.
– Policy - Class Map Name — Select a policy class map pair.
Aggregated Policer
To view aggregated policer statistics:
1
Click Network Administration > Quality of Service  QoS Statistics 
Aggregate Policer .
The following statistics for the previously-defined counters are displayed:
– Aggregate Policer Name — Policer on which statistics are based.
– In-Profile Bytes — Number of in-profile packets that were received.
– Out-of-Profile Bytes — Number of out-of-profile packets that were
received.
2
To add a new counter that applies to another aggregate policer, click Edit,
Add
.