Users Guide

376 CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Symbol Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
The following table describes the fields shown in the display.
Field Description
InOctets Number of received octets.
InUcastPkts Number of received Unicast packets.
InMcastPkts Number of received Unicast packets.
InBcastPkts Number of received broadcast packets.
OutOctets Number of transmitted octets.
OutUcastPkts Number of transmitted Unicast packets.
OutMcastPkts Number of transmitted Unicast packets.
OutBcastPkts Number of transmitted Broadcast packets.
FCS Errors Number of frames received that are an integral
number of octets in length but do not pass the FCS
check.
Single Collision Frames Number of frames that are involved in a single
collision, and are subsequently transmitted
successfully.
Multiple Collision Frames Number of frames that are involved in more than one
collision and are subsequently transmitted
successfully.
SQE Test Errors Number of times that the SQE TEST ERROR is
received. The SQE TEST ERROR is set in
accordance with the rules for verification of the SQE
detection mechanism in the PLS Carrier Sense
Function as described in IEEE Std. 802.3, 2000
Edition, section 7.2.4.6.
Deferred Transmissions Number of frames for which the first transmission
attempt is delayed because the medium is busy.
Late Collisions Number of times that a collision is detected later
than one slotTime into the transmission of a packet.
Excessive Collisions Number of frames for which transmission fails due to
excessive collisions.