Users Guide

224 Network Administration: Route Settings
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_RouteSettings.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
– Advertisement Interval Option —Select to indicate that an
advertisement option will be used by the system. This option indicates
to a visiting mobile node the interval at which that node may expect
to receive router advertisements. The node may use this information
in its movement detection algorithm.
–
Hop Limit —This is the value that the router advertises. If it is not
zero, it is used as the hop limit by the host.
–
Managed Address Configuration Flag —Select this flag to indicate
to attached hosts that they should use stateful auto configuration to
obtain addresses. Hosts may use stateful and stateless address auto
configuration simultaneously.
NOTE: If the Managed Address Configuration flag is set, an attached host can use
stateful auto configuration to obtain the other (non-address) information regardless
of the setting of this flag.
– Other Stateful Configuration Flag — Select this flag to indicate to
attached hosts that they should use stateful auto configuration to
obtain other (non-address) information.
–
Neighbor Solicitation Retransmissions Interval (mS) — Set the
interval to determine the time between retransmissions of neighbor
solicitation messages to a neighbor when resolving the address or when
probing the reachability of a neighbor.
–
Maximum Router Advertisement Interval (Sec) — Enter the
maximum amount of time that can pass between router
advertisements.
The interval between transmissions should be less than or equal to the
IPv6 router advertisement lifetime if you configure the route as a
default router by using this command. To prevent synchronization
with other IPv6 nodes, the actual interval used is randomly selected
from a value between the minimum and maximum values.
–
Minimum Router Advertisement Interval (Sec) —Enter the
minimum amount of time that can pass between router
advertisements or select
Use Default to user the system default.
The minimum RA interval may never be more than 75% of the
maximum RA interval and never less than 3 seconds.