Users Guide

Network Administration: VLAN 147
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_VLAN.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Acceptable Frame Type
The acceptable frame type can be set on a port to accept all frames (tagged
and untagged), tagged only, or untagged only. This setting takes precedence
over all other settings, so that if the acceptable frame type is tagged only,
incoming untagged frames are silently discarded, even if the port has a valid
PVID.
Standard VLAN
This section describes standard (non-voice) VLANs. It covers the following
topics:
• VLAN Membership
• VLAN Port Settings
• Protocol Group
• Protocol Port
• GVRP Parameters
•GARP Timers
•Private VLAN
VLAN Membership
The device supports up to 4094 VLANs (VLANs 1-4094).
Ports are assigned to a VLAN in the
VLAN Port Settings page.
To configure the ports in a VLAN:
1
Click Network Administration > VLAN > Standard VLAN > VLAN
Membership
.
Each existing port/LAG is labeled with one of the following codes,
regarding its membership in the VLAN:
–
T — Tagged. The interface is a member of a VLAN. All packets egress
to the interface are tagged. The packets contain VLAN information.
–
S — Static. The VLAN is user-defined.
–
U — Untagged. The interface is a member of a VLAN. Packets egress
to the interface are untagged.
–
F — Forbidden. The interface is denied membership to a VLAN.