Users Guide

Switch Management 107
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_SwitchManagement.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
To define the types of server from which the device accepts SNTP
information and the polling interval:
1
Click Switch Management > Time Synchronization > SNTP Global
Settings
.
2 Enter the fields:
–
Poll Interval (Sec.) — Enter the interval (in seconds) at which the
SNTP servers are polled.
–
Receive Broadcast Servers Updates — Enable/disable receiving time
information from Broadcast servers.
–
Receive Anycast Servers Updates — Enable/disable receiving time
information from Anycast SNTP servers.
–
Receive Unicast Servers Updates — Enable/disable receiving time
information from the SNTP servers defined on the switch.
–
Poll Unicast Requests — Enable/disable sending SNTP Unicast server
time information requests to the SNTP server.
SNTP Authentication
Use the SNTP Authentication page to enable/disable SNTP authentication
between the device and an SNTP server, and to set the means by which the
SNTP server is authenticated.
To configure SNTP authentication:
1
Click Switch Management > Time Synchronization > SNTP
Authentication
.
The previously-defined authentication keys are displayed.
2 Click Edit , Settings Icon ( ) to enable/disable SNTP Authentication .
This enables/disables authenticating SNTP sessions between the device
and an SNTP server.
3 Click OK .
4 Multiple keys can be defined. To add a new SNTP authentication key, click
Edit, Add , and enter the fields.
–
Encryption Key ID — Enter the number used to identify this SNTP
authentication key internally.