Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- Contents
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
Configure BIOS and install RHEL OS
Topics:
• Configure BIOS to boot from USB
• Install Red Hat OS
• Start Red Hat OS installation
• Configure BIOS to boot from SSD
Configure BIOS to boot from USB
1. Plug the bootable USB flash drive into VEP4600.
2. Boot the VEP4600 into the BIOS and tab to the Boot menu. For more information on how to access the BIOS, see VEP4600
Start up and serial console.
3. Select the Advanced tab. Select CSM Configuration and press Enter.
CSM Configuration
CSM support enabled
4. Use UEFI to install the Red Hat OS.
5. Select the Boot menu tab.
6. Highlight the UEFI USB Drive BBS Priorities option using the left and right arrows and press Enter.
9
30 Configure BIOS and install RHEL OS