Users Guide

Table 4. Firewall set parameters (continued)
Type specific param # Parameter data
[39:40]—Year
LS-byte first if little endian system. Two-
byte data required to form year.
41—month
42—date
43—hour
44—minute
Add the IPv6 port number with timeout
rule
25
Data 1—Protocol TCP and UDP
0 = TCP
1 = UDP
2 = both TCP and UDP
Data 2:3—port number
[2:3]—Port number from the ports
blocked or unblocked based on the state.
Date 4:9—Start time
[4:5]—Year
LS-byte first if little endian system. Two-
byte data required to form year.
6—month
7—date
8—hour
9—minute
Date 10-15—stop time
[10:11]—Year
LS-byte first if little endian system. Two-
byte data required to form year.
12—month
13—date
14—hour
15—minute
Add the IPv6 port number range with
timeout rule
26
Data 1—Protocol TCP and UDP
0 = TCP
1 = UDP
2 = both TCP and UDP
Data 2:5—port number
[2:3]—Port number from the ports
blocked or unblocked based on the state.
[4:5]—Year
Date 6:11—Start time
[6:7]—Year
LS-byte first if little endian system. Two-
byte data required to form year.
8—month
9—date
10—hour
11—minute
Date 12-17—stop time
[12:13]—Year
LS-byte first if little endian system. Two-
byte data required to form year.
14—month
15—date
16—hour
17—minute
Remove the IPv6 port number with
timeout rule
27
Data 1—Protocol TCP and UDP
0 = TCP
64 Configuration methods