Reference Guide
Table Of Contents
Temperature Sensor 8 ....................... Passed
Temperature Sensor 9 ....................... Passed
Temp Sensors: Overall test results ----- >>> Passed
root@dell-diag-os:/opt/dell/diag/bin#
root@dell-diag-os:/opt/dell/diag/bin# temptool --show --lpc
Temperature Sensor 1 temperature value is 30.3 C
Temperature Sensor 2 temperature value is 23.1 C
Temperature Sensor 3 temperature value is 22.2 C
Temperature Sensor 4 temperature value is 26.0 C
Temperature Sensor 5 temperature value is 21.8 C
Temperature Sensor 6 temperature value is 22.0 C
Temperature Sensor 7 temperature value is 23.5 C
Temperature Sensor 8 temperature value is 31.0 C
Temperature Sensor 9 temperature value is 42.0 C
root@dell-diag-os:/opt/dell/diag/bin#
updatetool
Use this command to update CPLD:
root@dellemc-diag-os:~# updatetool --dev=CPLD --index=1 --update --file= /mnt/media/xxxx-xxxxx-
xx_xxx_xxx.vme
00
Disable device protect
Disable CPLD protect operation success, wait HW reset
Write image to CPLD
INFO: Yafu INI Configuration File not found... Default options will not be applied...
Creating IPMI session via USB...Done
-------------------------------------------------
YAFUFlash - Firmware Upgrade Utility (Version 5.0.0)
-------------------------------------------------
(C)Copyright 2016, American Megatrends Inc.
Beginning CPLD Update...
Uploading Image : 100%... done
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
write CPLD image success
Enable device protect
Update CPLD image success
root@dellemc-diag-os:~# shutdown -h now
[ xxx.xxxxxx] reboot: Power down
(UNPLUGGED POWER CABLES)
BIOS Boot Selector for VEP4600
Primary BIOS Version x.xx.x.x-xx
CPLD Version:x.x
CPLD Reset Source=0x44
root@dellemc-diag-os:~# updatetool --dev=ALL --device_version
BIOS version:
x.xx.x.x-xx
CPLD version:
CPLD_VERSION : offset 0x600 = 0x9
7: 4 MAJOR_VER = x
3: 0 MINOR_VER = x
MAIN-BMC version:
x.xx
Dell EMC DIAG OS tools
83