Users Guide

Select the LAN interface to be congured.
MAC address
This eld displays the MAC address of the selected interface (read only).
Enable IPv4
Check this option to enable IPv4 support for the selected interface.
Enable IPv4 DHCP
Check this option to enable IPv4 DHCP support to dynamically congure IPv4 address using Dynamic Host Conguration Protocol (DHCP).
IPv4 Address
If DHCP is disabled, specify a static Subnet Mask to be congured for the selected interface.
• IP Address consists of four sets of numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
• Each set ranges from 0 to 255.
• First Number must not be 0.
IPv4 Subnet
If DHCP is disabled, specify a static Default Gateway to be congured for the selected interface.
• IP Address consists of four sets of numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
• Each set ranges from 0 to 255.
• First Number must not be 0.
IPv4 Gateway
If DHCP is disabled, specify a static Default Gateway to be congured for the selected interface.
• IP Address consists of four sets of numbers separated by dots as in 'xxx.xxx.xxx.xxx'.
• Each set ranges from 0 to 255.
• First Number must not be 0.
Enable IPv6
Check this option to enable IPv6 support for the selected interface.
Enable IPv6 DHCP
Check this option to enable IPv6 DHCP to dynamically congure IPv6 address using Dynamic HostConguration v6 Protocol (DHCPv6).
IPv6 Index
Choose the IPv6 Index.
IPv6 Address
Specify a static IPv6 address to be congured for the selected interface.
Subnet Prex Length
Specify a static IPv6 address to be congured for the selected interface.
• Value ranges from 0 to 128.
Enable VLAN
Check this option to enable VLAN support for the selected interface.
VLAN ID
Specify the Identication for VLAN conguration.
BMC web GUI
17