Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
Configure BIOS to boot from SSD
1. Unplug the installer USB drive from VEP4600.
2. Boot up the VEP4600 and navigate to the BIOS settings.
3. Navigate to Boot Tab. Scroll to Hard Disk Drive BBS Priorities using the up and down arrow keys and press
Enter.
4. Select Red Hat Boot Manager as Boot Option #1.
Configure BIOS and install RHEL OS
43