Install Guide
Table Of Contents
- Dell EMC VEP4600 Installation Guide
- About this guide
- VEP4600 platform
- Site preparations
- VEP4600 installation
- Power supplies
- Fans
- Management ports
- Specifications
- Chassis physical design
- IEEE standards
- Safety standards and compliance agency certifications
- Product recycling and disposal
- Agency compliance
- USA Federal Communications Commission statement
- Industry Canada Statement
- Brazil – Aviso da Anatel
- European Union EMC directive conformance statement
- Japan VCCI compliance for class A equipment
- Korean certification of compliance
- Mexico certification of compliance
- Taiwanese certification of compliance
- Thailand certification of compliance
- Singapore certification of compliance
- Dell EMC support
LED behaviors
Figure 4. VEP4600 LEDs
1. Power LED 2. Primary unit indicator LED
3. System LED 4. Locator LED
5. Temperature LED 6. Fan LED
7. SFP+ indicator LED 8. 10/100/1000 BaseT RJ-45 networking link (left) and activity
(right) LEDs
9. 10/100/1000 BaseT RJ-45 networking link (left) and activity
(right) LEDs for the processor (left) and for the BMC
(right)
Table 1. VEP4600 LED behavior (continued)
LED Description
System Status/Health LED
● Off—system off or in standby
● Solid green—Normal operation
● Flashing green—Booting
● Solid yellow (amber)—Critical system error or CPU power
off.
● Flashing yellow—Noncritical system error, fan failure, or
power supply failure
Power LED
● Off—system off or in standby
● Solid Green—Normal operation
● Solid yellow—POST is in process
● Flashing yellow—Power supply failed
Primary unit indicator LED
● Solid green—The system is in Stand-alone mode
● Off—The systems in standby mode
FAN LED
● Off—system off or in standby
● Solid green—Normal operation; fan powered and running
at the expected RPM
● Solid yellow—Fan failed
PSU LED
● Off—No power
● Solid green—Normal operation or standby mode
● Solid yellow—Power supply critical event causing a
shutdown
VEP4600 platform 9